PP-6-03 high-productive PTA torch is intended for inside and outside plasma transferred arc surfacing (PTA-process) of different parts by Fe-, Ni- and Co-based alloys.
Pure argon (99.995% Ar) is used as a working gas.
Features
Technical data
PTA torch schematic view
Features
• Horizontal design
• Maximum transferred arc current: 300A (100% duty cycle)
• Minimum inside diameter to be surfaced: 130 mm
• Available replaceable plasma and focusing nozzles with different orifice diameter. They are used in combinations (plasma nozzle/focusing nozzle): 3/6; 4/8 and 5/9 mm
• Electrode diameter: Ø4.0 and Ø4.8 mm
• Fully dismountable design
• Available holders with different length: 150mm / 300mm (basic) / 500mm / 750mm / 1000mm
Articles and website pages that mention this equipment
PM-300 - PTA surfacing module PM-300 is a surfacing module of the PTA systems manufactured by Plasma-Master Co., Ltd. PTA systems based on PM-300 are used for surfacing flat, face, cylindrical, conical and other surfaces of the parts.
PM-303 - Universal PTA system for automated surfacing based on CNC The PM-303 PTA system is designed for automated surfacing of flat, face, cylindrical, conical and other surfaces of different parts to protect them against wear, corrosion etc.
PM-304 - PTA system for automated surfacing of locomotive diesel engine valves (2nd generation) PM-304 PTA system (2nd generation) is intended for automatic plasma transferred arc (PTA) surfacing of engine valves by Fe-, Ni- and Co-based powders.
