PM-WMO-120

Welding oscillator PM-WMO-120 is designed for lateral oscillations of the PTA or any welding torch to increase the width of a deposited bead.

Supplied together with the control unit WMOCU2.

• Applications
• Technical data
• Features

Applications

Welding oscillator PM-WMO-120 is suitable for the following welding processes:

• Plasma Transferred Arc (PTA / PTAW)
• Plasma Arc Welding (PAW)
• Gas Metal Arc Welding (GMAW / GMAWP)
• Gas Tungsten Arc Welding (GTAW)
• Flux-Cored Arc Welding (FCAW)

---

Technical data

Mains voltage and frequency	1x230 V, 50/60 Hz
Weight-carrying capacity, no more, kg	10
Oscillation speed, mm/s	0-50
Oscillation width, mm	0-100
Dwell time left/right, s	0,0-2,0
Total slide travel, mm	120
DIMENSIONS (LxWxH), mm:
Oscillation unit	254х184х187
Control box	240х220х140
Weight, kg
Oscillation unit	6,1
Control box	4,2

Features

• Can be integrated to a common PTA machine control system
• Drive type – stepper motor
• It is possible to change the width and speed of torch oscillations during surfacing and also the position of axial line of the deposited bead
• There is the scale with pointer on face panel to control in online the torch position
• It is possible to adjust in online a dwell time on the edges of a bead
• When switching-on of oscillations, the carriage starts from the axial line or from one of the edges of a bead
• When switching-off of oscillations, the carriage stops on the axial line or in one of the edges of a bead
• The guide rail is reliably protected from welding splatters and powder
• Available two types of replaceable torch holder* for fixing the torch:
  • for vertical torch
  • for horizontal torch
  • *supplied upon request

---

---

Real appearance of the product and its technical data can differ due to constant improvement.