EN UA RU

PM-PF-10

Powder feeder PM-PF-10 is designed for supply and batching of a powder to a surfacing zone during PTA surfacing.

Powder feeder is drum type.

Argon is used as a transport gas.

Supplied together with the control unit PFCU5G.



Features

• Fully quiet
• Direct drum drive
• Drive type – stepper motor
• Has a possibility to regulate a gap between tube and drum in the range of 0-3 mm for fine adjustment of the powder feeding
• Control system is based on programmable logic controller (PLC). Control is carried out by 3.5" touch-screen (HMI) panel
• Can be integrated to a common PTA machine control system or robot and controlled remotely
• Built-in gas system with a flow meter

Technical data

Mains voltage and frequency1x230 V, 50/60 Hz
Powder feed (smooth adjustment), g/min1-160
Dosing accuracy, %±2
Working gasAr
Hopper capacity3,5 (15)
Powder particle size, mkm56-250
Powder flow rate (fine adjustment), kg/h≤3
DIMENSIONS (LxWxH), mm:
Powder feeder175х150х480
Control box240х220х140
Weight, kg
Powder feeder6,3
Control box4,0

Склад живильника порошку PM-PF-10:

  1. дозуючий пристрій
  2. прозорий бункер
  3. привід обертання барабана
  4. несучий корпус з основою для кріплення живильника на станині.

(Open image in full size: )

Back view

Real appearance of the product and its technical data can differ due to constant improvement.